50kg Load Cell Weight Sensor with HX711 ADC Converter
₵105.00
The 50kg Half-bridge Experiments Body Scale Load Cell Sensor is measuring; the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the intermediate, adhesive coating with white beam arms); and the outer edges to form a shear force in the opposite direction, i.e., middle strain beam bending necessary changes can occur under stress, strain beam side by another force should not be a barrier.
The sensor can be used with the following three methods
1. Using a sensor with an external resistors full bridge measurement range of a sensor range: 50kg. Higher requirements for an external resistor.
2. The uses of only two full-bridge sensors measuring range are the range of the two sensors and: 50kgx2 = 100kg.
3. The use of four full-bridge sensors measuring range is the range of four sensors and: 50kgx4 = 200kg.
5 in stock
Technical Details
- Weighing Load: 50 kg
- Sensitivity Range: 1 ± 0.1mv/v Output
- Repeatability: 0.03% F.S.
- Resistance (Ohm): Input: 1000
- Insulation Resistance (mOhm): 5000
- Length: 34mm
- Width: 34mm
- Height: 4mm
- Weight: 30g
- Wire Length: 12cm
Features
- Internal 1000Ohm Half-Bridge Strain Gauge Load Cell
- Load Cell Range: 50kg
- Half-Bridge Structure
- Widely Used in Hopper Scales, Platform Scales, Platform Balances, Belt Scales, and Other Electronic Weighing Devices
- Signal Sent Via Red Signal Wire When Stretching
- Alloy Steel Wired Weighing Load Cell with High Accuracy
- Simple Structure and Easy Installation
- Can Use Multiple Load Sensors in Parallel to Increase Capacity Range
Applications :
- Weight Measurement – Used in body scales to measure weight accurately.
- Industrial Weighing – Applied in industries for precise weight measurements in production lines.
- Medical Devices – Used in medical weighing scales and equipment for health monitoring.
- Robotics – Integrated into robotic systems for force and weight detection.
- Load Testing – Used in load testing and structural testing of materials and objects.
- Load Monitoring – Monitors load capacity in machines, vehicles, and heavy equipment.
- DIY Projects – Ideal for use in personal electronics or maker projects requiring weight sensing.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.